Project in Amarillo
Full Interior and Cabinet Repaint
- Interior Painting
- Cabinet Painting & Refinishing
Careful prep, clean lines, and an even finish throughout. Browse the photos to see the finished work.
Get an estimate for a project like thisEpoxy Floor Coatings in Amarillo, Lubbock & DFW
We grind, prep, and apply industrial epoxy systems for floors that resist chemicals, abrasion, and daily traffic.
What's Included
- ✓ Surface grinding and prep
- ✓ Industrial epoxy base and topcoat
- ✓ Optional flake or quartz finishes
- ✓ Slip-resistant options
How our epoxy floor coatings process works
Inspect the slab
We check for cracks, moisture, oil, and old coatings.
Grind and repair
The concrete is mechanically profiled and damaged areas are filled.
Base coat
The bonding coat is applied across the floor.
Flake and topcoat
Decorative flake is broadcast, then sealed under a clear wear coat.
Cure
We tell you when the floor is ready for foot traffic and vehicles.
Why epoxy floors fail, and how to avoid it
Almost every peeling garage floor comes down to preparation. Epoxy needs open, clean concrete to grip. A slab that was only swept or acid-washed, or one with oil, sealer, or moisture in it, will let the coating go, often in sheets under hot tires.
We mechanically profile the concrete, repair cracks and pitted areas, and check the slab before coating. That preparation, not the product label, is what decides how long the floor lasts.
What goes into a coated floor
A typical system is built in layers: a primer or base coat that bonds to the concrete, optional decorative flakes broadcast into the wet coating for color and slip resistance, and a clear topcoat that takes the wear. The result is seamless, resists oil and chemical stains, and cleans up with a mop.
Flake blends and solid colors can be chosen to suit a home garage, a workshop, or a showroom floor.
What affects the cost of an epoxy floor
Square footage sets the baseline. The condition of the concrete is next: cracks, spalling, and old coatings that have to be ground off add preparation time. The system you choose, including flake coverage and the type of topcoat, also changes the price. We look at the slab before quoting so the number reflects the real work involved.
Featured Painting Projects
Project in Lubbock
Full Interior Repaint
- Interior Painting
- Cabinet Painting & Refinishing
- Wood & Deck Staining
Careful prep, clean lines, and an even finish throughout. Browse the photos to see the finished work.
Get an estimate for a project like this
Project in Lubbock
Cabinet & Interior Repaint
- Interior Painting
- Cabinet Painting & Refinishing
Careful prep, clean lines, and an even finish throughout. Browse the photos to see the finished work.
Get an estimate for a project like this
Project in Amarillo
Whole-Home Cabinet & Interior Repaint
- Cabinet Painting & Refinishing
- Interior Painting
Careful prep, clean lines, and an even finish throughout. Browse the photos to see the finished work.
Get an estimate for a project like thisEpoxy Floor Coatings FAQ
How long before we can use the floor?
Most floors are walk-ready in 24 hours and full-use within a few days.
Will hot tires lift an epoxy floor?
Hot-tire pickup happens when a coating is not well bonded. A properly ground slab and a quality coating system are what prevent it.
Can you coat a cracked or stained garage floor?
Usually. Cracks and pits are repaired and stains are ground out as part of the preparation. We will flag any slab problems that need attention first.
Is an epoxy floor slippery when wet?
Decorative flake and anti-slip additives in the topcoat give the floor texture. Let us know how the space is used and we will recommend the right finish.
Epoxy Floor Coatings Near You
We provide epoxy floor coatings across West Texas. See details for your city: